Shanghai Qiyi International Trade Co., Ltd.
Products
Contact Us
  • Contact Person : Ms. Li Adine
  • Company Name : Shanghai Qiyi International Trade Co., Ltd.
  • Tel : 86-21-31267690
  • Fax : 86-21-61264329
  • Address : Shanghai,Shanghai,Room1615 No.3 Building, No.1088 Jiefangdong Road,Fengxian
  • Country/Region : China
  • Zip : 201400

Electromagnetic Flowmeter

Electromagnetic Flowmeter
Product Detailed
Related Categories:Flow Meters
Measuring Fluid conducting fluid Accuracy Grade 0.5 Repeatability 0.15%, 0.25%

technical advantages of FFM62 intelligentized electromagnetic flowmeterIntelligentized transducer adopts the internationally advanced MCU and SMT technology. It is reliable in performance, high in precision, low in power consumption, stable in zero, and convenient for parameter setting. The Chinese LCD in the form of lattice is provided. The high-precision constant current source low-frequency rectangular wave excitation is adopted to ensure the stable magnetic field. It is free from the electromagnetic interference. No vortex effect is generated and the orthogonal and in-phase interference are small. In addition, no polarization will occur. These characteristics will ensure the low power consumption of flowmeter. No heat is generated and the zero is quite stable. No drift will happen and the little pollution will happen to the electrode.

Intelligentized transducer adopts clutter suppression technology to eliminate the clutter completely to ensure the stable measurement. In order to ensure the accurateness in measurement, the function magnetic field analysis is adopted to remove bias flow. These techniques help overcome the interferences of noises from the fluids such as slurry and paper pulp to ensure the stability and accurateness in measurement. It is the greatest advantage of Floworld FFM 62 intelligentized electromagnetic flowmeter.

The electrode lead of the sensor is led out while being kept parallel to magnetic line of force. In this way, the induction current in the circuit of the electrode lead of most electromagnetic flowmeters is removed; the oxthogonal interference and zero drift that result from the unparallelism between the electrode lead and magnetic line of force are overcome to ensure the linearity and precision of the sensor.

Excitation coil adopts the advanced NC coil winding machine. The coils are automatically controlled through the use of PLC. For the already wound excitation coil, it will be treated with special technology to ensure the constant and uniform magnetic field as well as the repeatability and interchangeability of the sensor, thus ensuring the good precision, linearity and repeatability of the sensor.

 
Main technical parameters of FFM62 intelligentized electromagnetic flowmeterFluid to be tested: conducting liquidPrecision grade 0.5 Repeatability 0.25%Fluid temperature  -25~180Rated pressure 1.0MPa,1.6MPa,4.0MPaFlow rate range  0.3~12m/sConductivity  ≥5μs/cmMaterial of the pipe to be tested: 304 stainless steelLining: rubber, polytetrafluoroethylene, etc. Electrode material  stainless steel and Hastelloy alloys, etcProtection degree IP65 and IP68Installation form clamping connection for DN25~DN300; flange connection for DN350 and abovePower: 220VAC,50HZ(24VDC optional)Output: standard pulse output, 4~20mA,RS485,HART protocol outputStructural form  integrated and dividedElectrical interface  M20×1.5Explosion-proofing form  common non-explosion proof; explosion suppression (optional)
 

Application of FFM 62 intelligentized electromagnetic flowmeter

The flowmeter is applied to the measurement on any component in motion and disturbance, which is free from blockage and damage due to the pressing and is resistant against wear and tear.

The measurement is not affected by the variation in other physical factors, to be more specific, fluid density, temperature, pressure, viscosity, Reynolds number and certain conductivity.

The actual flow can be marked by water alone as the medium for test. Without any additional modification, the flow of any other conducting medium can be measured. The measuring pipe shall not come into contact with the medium. Different lining and electrode material can be selected for measuring the flow of the corrosive conducting medium. There is less rigid requirement on the straight pipe of the flowmeter in the front and the rear: 5D in the front and 3 D in the rear (D interior diameter of the pipe)

Electromagnetic Flowmeter



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.